05). In warm obturation technique, no significant difference was found Crenolanib mouse between the 2 groups ( with and without the smear layer) of AH26 (P > .05). On the contrary, in groups of Pulp Canal sealer, fluid transport values were significantly less when the smear layer was removed (P > .05). Finally, no significant difference was observed between the groups of Gutta-Flow (with and without the smear layer) (P >

.05).

Conclusions. Under these in vitro conditions, it seems that smear layer removal improves the ability of the filling materials to prevent the fluid movement, at least after the use of warm obturation techniques. On the contrary, smear layer removal does not seem to improve the same ability after the use of cold lateral compaction technique. Further laboratory and also clinical studies are needed in the future to compose a clear view concerning the improvement of sealing ability following smear layer removal. (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2010;109:e145-e153)”
“A series of environmentally friendly waterborne poly(urethane acrylate) (WPUA)/silica (SiO(2)) hybrids were synthesized by a sol-gel process on the basis of isophorone diisocyanate, polyester polyol (GE-210),

dimethylpropionic acid, butyl acrylate and methyl methacrylate monomers, tetraethoxysilane (TEOS), and 3-glycidyloxy-propyl trimethoxysilane (GLYMO) Selleckchem Erastin as a coupling agent. The mechanical properties of the WPUA/SiO(2) hybrids were investigated through tensile and hardness tests. Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, https://www.selleckchem.com/products/cl-amidine.html atomic force microscopy, and X-ray diffraction were used to assess the fracture surface morphology and the dispersions of the WPUA/SiO(2) hybrids. The strength and hardness values of the WPUA/SiO(2) hybrids were improved significantly. This was attributed to the synergistic effect

of WPUA, GLYMO, and TEOS. The results show that SiO(2) particles of the membranes had a uniform dispersion and formed an excellent interfacial bonding layer on their surfaces. The prepared hybrids showed good thermal stability and mechanical properties in comparison with pure WPUA and showed tunable transparence with the SiO(2) fraction in the film. Through suitable adjustment of the TEOS content, some thin hybrids have potential applications as specialty materials. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 119: 1683-1695, 2011″
“Study Design. This is a case report of a posterior extrusion of the polyethylene core from a CHARITE arthroplasty. This is the first reported case of posterior dislocation of the polyethylene and the revision strategies used to correct this problem.

Objective. To report a novel failure mechanism and revision strategy for CHARITE total disc arthroplasty (TDA).