4 μm pore size, 0 33 cm2 polyester Transwell® inserts previously

4 μm pore size, 0.33 cm2 polyester Transwell® inserts previously coated with rat tail collagen type I (BD Biosciences, Oxford, Oxfordshire, UK) at a density of 1.5 × 105 cells/cm2. After 72 h, they were raised to an AL interface and cultured in the supplier’s differentiation medium (Lonza) for 21 days. Thereafter, the medium was changed every 2–3 days. The TEER was recorded using an EVOM volt–ohm–meter with STX-2 chopstick

electrodes (World Precision Instruments, Stevenage, UK). Measurements on cells in LL culture were taken immediately before the medium was exchanged. For cells cultured at the AL interface, 0.5 ml and 1.0 ml of medium was added to the apical and basolateral chambers, respectively. Cells were returned

to the incubator to equilibrate for at least 20 min C59 wnt in vitro before TEER was measured. TEER values reported were corrected for the resistance and surface area of the Transwell® filters. Cells were fixed on the Transwell® membrane using 3.7% w/v paraformaldehyde in PBS for 15 min at room temperature. The fixing solution was removed and cell layers were stored submerged in PBS at 4 °C until processed. For histology preparation, filters were excised from the inserts and sandwiched between two biopsy foam pads inside a histology cassette. Samples were subjected to 5 min incubations in increasing concentrations of ethanol in dH2O (25, 50, 75, 90, 95, 100% v/v), Ivacaftor cell line followed by two 5 min exposures to xylene and a 30 min treatment in paraffin wax. Dehydrated samples were embedded in wax and 6 μm thick cross-sections cut using a

RM 2165 rotary microtome (Leica, Milton Keynes, UK) before being mounted on poly-l-lysine coated histology slides. Cellular cross-sections were incubated twice in xylene for 2 min and rehydrated in decreasing concentrations of ethanol in dH2O (100, 95, 90, 75, 50, 25% v/v) for 2 min each. Slides were then immersed in 100% dH2O before histological PD184352 (CI-1040) staining. All incubation steps for histological staining were performed at room temperature. For morphological staining, slides were immersed in Mayer’s haematoxylin stain for 10 min and excess stain removed by rinsing for 2 min in dH2O. Samples were then submerged for 2 min in Scott’s tap water (3.5 g sodium bicarbonate, 20 g magnesium sulphate in 1 L dH2O) before incubation in 1% v/v eosin in dH2O for 5 min. For mucus staining, samples were submerged in a 1% w/v alcian blue in 3% v/v acetic acid pH 2.5 for 5 min. Excess stain was removed with a 2 min dH2O wash before incubation in neutral fast red for 5 min. For both types of staining, the samples were rinsed in dH2O until the colour ran clear and finally, mounted with glycerol on cover slips for imaging. Cells were fixed in a 1:1 mixture of medium and fixing solution (2.5% v/v glutaraldehyde in 0.1 M sodium cacodylate buffer, pH 7.2) which was added to both apical and basolateral chambers of the Transwell®.

Comments are closed.